Need help?Do you have a question about the Arlec AM 500 and is the answer not in the manual?
Install batteries, connect AC adapter, and set house code on the Control Panel.
Install batteries and set house code on the Door Sensor and Movement Sensors.
Mount Control Panel, Door Sensor, and Movement Sensors according to layout guidelines.
Connect AC adapter and switch on the system to prepare for programming.
Set a personal security code for arming and disarming the alarm system.
Steps to arm the system and the exit delay period for leaving the premises.
How the system detects intruders, triggers alarms, and the delay for disarming.
How the tamper-proof feature triggers the siren if the control panel is disturbed.
Details on entrance/exit delays and system status indicators.
Specifies alarm output, wireless range, and motion sensor coverage.
General checks for house code, range, and component connectivity.
Troubleshooting steps for the control panel's power and code programming.
Resolving problems related to movement and door/window sensors.
Checks for battery, gap, and range issues specific to the door sensor.
Verifying battery and wiring for the optional extension siren.
Information on adding extra sensors to the alarm system.
How to connect and install the AM553 Compact Extension Siren.
Precautions for component placement, battery types, and pet detection.
Clarifies system purpose and importance of keeping instructions.
Recommendations for regular system testing and battery replacement.
Details of the 12-month product guarantee against defects and claims.
The necessity of retaining the purchase receipt for warranty claims.
General| Type | Motion Sensor |
|---|---|
| Power Source | Battery |
| Detection Range | 12 meters |
| Detection Angle | 110 degrees |
| Installation | Wall Mount |
| Compatibility | Arlec Smart Home System |
To Next Page