Armstrong The Brain DRV40 User Manual

16
Armstrong International
Parc Industriel Des Hants-Sarts, 2ème Avenue No. 4, Haerstal, B-4040, Belgium
armstronginternational.com/brain
Installation - DRV40
Before fitting to the pipework, it is
recommended that unions are tted to the
inlets and outlet. This will enable the DRV
to be easily removed, if required.
Flush pipework thoroughly
(minimum of 5 minutes).
Fit the DRV to the pipework.
Attach the Electronics Module and secure
using the circlip supplied.
1
2
3
4
Hole markers inside the Electronics Module
case indicate where cables can be tted for
options such as BrainScan® or an error
relay. If these are required but have not been
pretted, contact Armstrong for further advice.

Armstrong The Brain DRV40 Specifications

General

Brand	Armstrong
Model	The Brain DRV40
Category	Control Unit
Language	English