Armstrong The Brain DRV40 User Manual

18
Armstrong International
Parc Industriel Des Hants-Sarts, 2ème Avenue No. 4, Haerstal, B-4040, Belgium
armstronginternational.com/brain
4mm
HEX
Commissioning
Commissioning must be carried out in accordance with these instructions by designated, qualied and competent
personel.
Ensure that the system is powered and
the display on the Electronics Module is
illuminated.
Make sure the hot and cold inlet supplies
are at their designated pressures and
temperatures.
Close all the mixed water outlets and turn on
the circulating pump.
Ensure the system is powered off and the 4 pin plug is unplugged on the electronics module.
Flood the system in the following sequence:
• Open the cold water supply isolation valve(s).
• Open the outlet ow isolation valve(s).
• Open the hot water supply isolation valve(s).
• Once ooded, connect and secure the 4 pin plug to the electronics module.
Close and secure the Electronics Module with the 2 x 4mm hexagon socket screws provided.
Note! The Electronics Module must be closed for the DRV40 to function.
1
2
3
4
5
6

Armstrong The Brain DRV40 Specifications

General

Brand	Armstrong
Model	The Brain DRV40
Category	Control Unit
Language	English