ARP 2600 - Vibrato Effects with ADSR and VCO2 Control

73
Initial
Gain
Alternately open
Manual Start
Button
Now lower
the
ADSR-Filter
control
input attenuator
to
about
nine-tenths
of
maximum and
listen
to the result when the ADSR
generator is activated. Again
at eight-tenths,
and so on. As
the
input
control voltage
is
attenuated, the filter
is
swept
up to less
and
less
of
its
full
range
and
the audible output
grows
correspondingly dul-
ler.
This
is
very
useful
technique
in simulating various
highly
damped
percussion effects
such
as string
pizzicatos
from violins, cellos, and
basses.