Antenna Analyzer AIM4170 page 18
UTILITIES:
L-C Matching
Networks by WY2U
This program which is available on the web takes the impedance
data (R and X) that is measured at the input end of the
transmission line and calculates the L-C network required to
transform it to the correct impedance (for example, 50 ohms) to
match the transmitter. This can be used when designing a tuner to
find the components to match an antenna over the desired
frequency range.
When you click on this link, your computer must be connected to
the internet. You may have to authorize the connection if you
have a firewall program.
ZPlots by AC6LA
This program uses the data saved in the .csv file (by "File Save")
to plot graphs for presentations. It features plot parameter
selection and zoom capability. It can plot parameters that were
not included in the original AIM plot and the plot range can be a
subrange of the original data.
When you click on this link, your computer must be connected to
the internet. You may have to authorize the connection if you
have a firewall program. You can download the Zplots program
to your computer and then run it off-line.
HELP:
Help --
A help file pops up in the local browser. This is in html format
and can be edited by the user if desired. The file name is
“help_xx.htm”.
About --
The present version of the programs in the PC and the controller
are displayed. The url of the W5BIG website is also displayed.
Check this url for the latest software.
To Next Page
Loading...
