EasyManuals Logo

ARRI ALEXA Plus 4:3 User Manual

ARRI ALEXA Plus 4:3
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
262 Appendix Warning and Error Messages
Media: Low capacity The recording medium has less than 3
minutes recording time left. Prepare a new
card for recording.
Card 1/2: Prerec
space low
The prerecording duration nearly fills the
remaining recording time on the SxS PRO
card in slot 1/2. Prepare a new card for
recording.
Media: Prerec space
low
The prerecording duration nearly fills the
remaining recording time on the recording
medium. Prepare a new card for recording.
Card 1/2: Rec
inhibited
The SxS PRO card in slot 1/2 is protected.
Remove the card from the camera, slide the
switch located on the camera back end to
the Rec enable position and re-insert the
card.
Media: Rec. inhibited The recording medium is protected.
Remove the card from the camera, slide the
switch located on the camera back end to
the Rec enable position and re-insert the
card.
Card 1/2: Full The SxS PRO card in slot 1/2 is selected,
but the SxS PRO card is full. Use a new
card. Card in other slot can still record.
Media full The recording medium is full.
Card 1/2: Wrong file
system
The SxS PRO card in slot 1/2 is not
formatted in the file system required by the
camera. Format the card.
Media: Wrong file
system
The recording medium is not formatted in
the file system required by the camera.
Format the medium.
Card 1/2: Card is too
slow
The write speed of SxS PRO card in slot 1/2
is insufficient for the sensor fps set on the
camera. Use a card with a higher write
speed.
Media too slow The write speed of recording medium is
insufficient for the sensor fps set on the
camera. Use a medium with a higher write
speed.
Card 1/2: files not
consistent
The metadata of one or more files on SxS
PRO card in slot 1/2 are not consistent.
Backup any data on the cards and format
the card.
Media: files not
consistent
The metadata of one or more files on the
recording media are not consistent. Backup
any data on the medium and format the
medium.
Card 1/2: invalid card
type
The card in slot 1/2 is not an SxS PRO card.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ARRI ALEXA Plus 4:3 and is the answer not in the manual?

ARRI ALEXA Plus 4:3 Specifications

General IconGeneral
BrandARRI
ModelALEXA Plus 4:3
CategoryCamcorder
LanguageEnglish

Related product manuals