Functions
26
To Perform a Light Engine Compensation:
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Fixture Settings is displayed. Press the encoder to open the menu.
3.Turn the encoder, until LE Compensation is displayed. Press the encoder to open the menu.
4.Select Light Engine Compensation State and press the encoder.
5.Select ON to activate Light Engine Compensation, select Off (Default setting) to deactivate.
This function is not available for SkyPanels with Light Engine Generation 1.
6.The SkyPanel adjusts output to match with SkyPanel with LE Gen1 installed.
Please find a detailed overview of the fixture menu in chapter Overview of the Fixture Menu on page 35.
To Next Page
Loading...
