EasyManua.ls Logo

Arrow Storage Products Select SCG88CC - User Manual

Arrow Storage Products Select SCG88CC
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gloves must be worn
at all times to reduce
risk of injury!
Owner’s Manual
& Assembly Guide
730770520
BUILDING DIMENSIONS
* See Inside for Detailed Safety Information.
Size rounded off to the nearest foot
For proper base construction see page 12
Nominal Size
8’ x 8’
01IW
Base
Size
97 1/2” x 92 3/4”
247,7 cm x 235,6 cm
Exterior Dimensions
(Roof Edge to Roof Edge)
Width Depth Height
Interior Dimensions
(Wall to Wall)
Width Depth Height
Door
Opening
Width Height
Approx.
Size
Storage
Area
8’ x 8’ 59 Sq. Ft. 399 Cu. Ft. 99 3/4” 95 1/4” 91 3/8” 94 3/4” 90” 90 1/16” 59 1/4” 69”
2,4 m x 2,4 m 5,5 m
2
11,3 m
3
253,4 cm 241,9 cm 232,1 cm 240,7 cm 228,6 cm 228,8 cm 150,5 cm 175,3 cm
Model No.
SCG88FG
SCG88SG
SCG88CC
SCG88BG
ShelterLogic.com
/
product-registration
Register • Enregistrer • Regístrate
Question and Answer IconNeed help?

Do you have a question about the Arrow Storage Products Select SCG88CC and is the answer not in the manual?

Summary

Building Dimensions

Key Building Measurements

Provides exterior and interior dimensions, storage area, and door opening sizes.

General Safety and Assembly Guidelines

Sharp Edge Handling

Warning about sharp edges and the need for gloves during assembly.

Assembly Site Safety

Ensures safe assembly by avoiding wind, keeping children/pets clear.

Base and Anchoring Importance

Stresses the need for a level base and secure anchoring for structural integrity.

Assembly and Maintenance Procedures

Optimal Site Selection

Guidance on choosing a level area with good drainage for shed placement.

Shed Care and Rust Prevention

Instructions for cleaning, maintenance, and protecting the shed from rust.

Parts and Hardware Reference

Hardware Identification Guide

Visual and textual guide to identify all fasteners used in the assembly.

Constructing a Foundation

Foundation Requirements and Options

Details on base flatness, levelness, and choices like wood platform or concrete.

Step 1: Floor Frame Assembly

Floor Frame Construction Details

Specific steps and diagrams for building the floor frame structure.

Step 2: Pre-Assembly

Component Pre-Assembly Steps

Instructions for assembling key parts before the main structure build.

Step 3: Framing Walls

Assembling Wall Frames

Detailed guide for constructing the main wall framework of the shed.

Step 4: Door Jamb Installation

Attaching Door Jamb Components

Instructions for installing the door jambs onto the main structure.

Step 5: Stud Installation

Securing Vertical Studs

Guide for installing the vertical studs that form the wall structure.

Step 6: Side Siding Installation

Attaching Side Siding Panels

Instructions for fitting and fastening the siding panels to the side walls.

Step 7: Rear Siding Installation

Attaching Rear Siding Panels

Procedure for installing the siding panels on the rear wall of the shed.

Step 8: Front Siding Installation

Attaching Front Siding Panels

Instructions for fitting and fastening the siding panels to the front wall.

Step 9: Gable Assembly

Installing Gable End Structures

Steps for assembling and attaching the triangular gable sections at the ends.

Step 10: Roof Beam Installation

Securing Roof Support Beams

Guide for attaching the main horizontal beams that support the roof panels.

Step 11: Roof Panel Installation

Attaching Roof Covering Panels

Instructions for installing the roof panels to complete the roof structure.

Step 12: Door Assembly

Constructing and Installing Doors

Detailed steps for assembling and fitting the shed doors.

Anchoring Options and Final Checks

Securing the Building Structure

Final instructions for anchoring the shed to ensure stability and prevent wind damage.

Arrow Storage Products Select SCG88CC Specifications

General IconGeneral
BrandArrow Storage Products
ModelSelect SCG88CC
CategoryOutdoor Storage
LanguageEnglish

Related product manuals