Brouwmarkt BV, Markerkant 1111, 1316 AE Almere
www.braumarkt.com
Filling the Malt Pipe with Malt
1. Attach 2 handles (C) to the top malt screen (A).
1. Place 1 x white plastic cap (I)
on mode 1 or 2.
Put mode 1 or 2 in malt pipe
(See nr. 8 components).
2. Add malt to the malt pipe (8).
3. Disconnect 1 x white
plastic cap (I).
4. Proceed from step 3 in Malt
pipe and overflow pipe
3. Place assembly of step 3 on assembly of step 4
using 1 x short pipe (D) or 1 x long pipe (E)ac-
cording to chosen mode (1 or 2). Place 1 x single
female thread connector (G) on top.
2. Attach 1 double female thread
connector (F) to mode 1 or 2.
To Next Page
Loading...
