Need help?Do you have a question about the Art Pro Tube MP and is the answer not in the manual?
General| Type | Tube Microphone Preamp |
|---|---|
| Channels | 1 |
| Tube Type | 12AX7 |
| Output Impedance | 600 Ω |
| Polarity Switch | Yes |
| Inputs | XLR |
| Outputs | XLR, 1/4" |
| THD | < 0.1% |
| Gain | 60 dB |
| Weight | 1.5 lbs |
| Phantom Power | +48V |
Details XLR balanced and 1/4" TS unbalanced inputs for microphones and instruments, including pin configuration.
Describes the active balanced XLR and unbalanced 1/4" TS outputs, usable simultaneously.
Explains how to connect the supplied AC adapter and safety precautions for powering the unit.
Covers Input Gain, +20dB Gain/Norm switch, Phantom Power switch, Output Level, Phase Reverse switch, and Power/Peak LED.
Details the hybrid design, transformerless concept, and technology used in the TUBE MP.
Describes primary uses as a microphone preamp, instrument preamp, and direct box.
Details physical dimensions, weight, electrical characteristics, performance metrics, gain ranges, and power requirements.
Covers the one-year limited warranty period, exclusions for misuse or alterations, and required proof of purchase.
Provides details on obtaining warranty service, including steps for returning units and contact information.
Step-by-step guide for returning units for service, including obtaining an RA number, packing instructions, and shipping details.
Lists other ART audio equipment for recording, live sound, and instruments.
To Next Page
