Need help?Do you have a question about the Art TubeFire 8 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Sample Rate | Up to 96kHz |
| Bit Depth | 24-bit |
| Tube | 12AX7 |
| Phantom Power | Yes |
| A/D Resolution | 24-bit |
| Connectivity | ADAT |
| Power Output | Not applicable |
| Inputs | 8 XLR/TRS combo inputs |
Connects the unit to mains power, ensuring a good ground connection.
Details pinouts for balanced XLR/1/4" inputs and 1/4" outputs.
Explains connecting the unit to a computer via Firewire for data transfer.
Describes input gain, pad, phase, low-cut, and output controls on the front.
Details balanced I/O, output level switch, wordclock, and Firewire ports on the rear.
Guide on setting gain and output levels for optimal signal-to-noise ratio.
Instructions on optimizing rear output levels for different system sensitivities.
How to use the headphone output for monitoring and mixing.
Steps for installing the ART Firewire driver for Windows.
Overview of the ART Card Control Panel for settings adjustment.
Guide to changing the device name for easier identification in software.
Procedure for setting the sample rate via the control panel and DAW.
How to optimize buffer depth for low latency and avoid dropouts.
Connecting and configuring for external wordclock synchronization.
Steps to set sample rate using the Audio MIDI Setup utility.
Configuring for external wordclock sync on macOS.
Combining multiple audio devices into one for Mac systems.
Connecting multiple TubeFire 8™ units for increased I/O.
Examples of use in studios, live sound, and broadcast.
Details the three-year warranty period and coverage.
Conditions under which the warranty is void or does not apply.
To Next Page
