Need help?Do you have a question about the Art Pro Channel and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Mic Preamp | Yes |
| Output Impedance | 600 Ohms |
| Phantom Power | 48V |
| Inputs | XLR, TRS |
| Outputs | XLR, TRS |
| Tube | 12AX7 |
| THD | <0.1% |
| Power Supply | External |
| Weight | 3.6 kg |
Guidance on connecting the unit to a power source.
Details on connecting audio inputs and outputs.
Warns about electrical hazards and proper handling.
Steps and considerations for turning the unit on.
Details the functionality of the preamp section.
Explains how to adjust the input gain level for the preamp.
Describes the +20dB gain boost switch for the preamp.
Explains the +48V phantom power supply for microphones.
Interpreting the LED indicators for tube character and gain reduction.
Sets the point at which the compressor begins to act on the signal.
Determines the amount of gain reduction applied by the compressor.
Sets the final output level of the Pro Channel.
Details the terms and conditions of the product warranty.
Procedures and advice for obtaining product service.
To Next Page
