Need help?Do you have a question about the Art Project Series and is the answer not in the manual?
Explains warning symbols for electric shock and important operating instructions.
Covers reading instructions, not opening, environment, handling, servicing, and installation.
Steps for setting up on Windows PC and MAC, including driver needs.
Information on obtaining the ASIO driver and recording software.
Detailed description of front panel input and output jacks.
Describes rear panel and other connection points (+48V, USB, MIDI, Main Output).
Details on output level, headphone level, and monitor mix controls.
Suggestions for setup in recording applications for low-latency monitoring.
Explains how input gain controls adjust input amplifiers for dynamic range.
Covers gain controls, output gain, input monitor, and headphone level adjustment.
Details on the phantom power switch, its function, and safe operation.
Explains USB bus power and the function of LED level indicators for signal and clip.
How to connect and configure external MIDI devices with the unit.
Explains the USB-MIDI interface for connecting instruments and equipment to a computer.
How the MIDI interface appears in Windows Device Manager and MAC Audio/MIDI setup.
Steps for configuring Cubase's Studio Setup for MIDI I/O.
How to use the MIDI Device Manager to assign MIDI outputs.
Example of assigning the unit's MIDI output to a General MIDI device in Cubase.
Advice on preventing noise by using correct line level signals and avoiding gain stacking.
Steps for connecting the unit, setting computer audio devices, and using recording software.
Discusses latency and the need for the ART ASIO driver for Windows users.
Using the USB Pre IV as a high-quality microphone preamp for dynamic, condenser, and ribbon mics.
Ideal use as a portable preamp and the importance of +48 Volt phantom power.
Using the unit as a DI for instruments like bass and guitar, with simultaneous output use.
Details the three-year warranty and the process for online product registration.
Conditions voiding warranty and limitations on consequential damages.
Steps for troubleshooting and obtaining a return authorization for service.
Details on input/output connection types, maximum levels, and impedance.
Specifications for THD, CMRR, Channel Separation, Noise Ratio, and Dimensions.
To Next Page
General
