5
Quick Startup Guide
Using the USB Pre IV with:
Windows PC:
Please log onto the artproaudio.com website.
Register your unit.
You will need to download the ASIO driver for this unit from the
ART website also.
USB PRE IV Driver:
To download the driver, you will need to log onto the artproau-
dio.com website. Download the driver from the support section
on the ART website (www.artproaudio.com).
MAC:
Please log onto the artproaudio.com website.
Register your unit.
There are no additional drivers needed.
Recording Software:
Please see the additional information sheet included, to access
this software download.
To Next Page
Loading...
