Need help?Do you have a question about the Art PRO MPA and is the answer not in the manual?
Input and Output Connections| input connections | XLR (balanced), 1/4 inch unbalanced |
|---|---|
| output connections | XLR (balanced), 1/4 inch unbalanced |
| input impedance | XLR, 1/4 inch 1.67k ohms, 840K ohms |
Performance| maximum input level (XLR) | +17dBu |
|---|---|
| maximum input level (1/4 inch) | +20dBu |
| maximum output level (XLR) | +28dBu |
Electrical Specifications| power requirements | 100-125VAC, 25W (USA) |
|---|---|
| maximum gain | XLR to XLR >72dB |
| equivalent input noise (EIN) | XLR to XLR (shorted input) >-124dBu unweighted |
Weight and Dimensions| height | 3.50 inches |
|---|---|
| width | 19 inches |
| depth | 6.5 inches |
Information for product registration.
Procedure for removing the unit from its packaging.
Connecting the unit to an AC power source.
How to connect audio input and output cables.
Mounting the unit in a standard 19" rack.
The main power switch for the unit.
Adjusts the gain level of the input signal.
Adjusts the signal level of the output.
Selects the input gain range.
Reverses the phase of the audio signal.
Engages or disengages +48V phantom power.
Low-frequency roll-off filter control.
Visual indicator of tube gain stage.
Displays the output signal level.
Description of rear panel input connectors.
Description of rear panel output connectors.
Primary use as a microphone signal booster.
Using the unit as a direct input box.
Application in audio mastering and mix bus processing.
Creative uses for adding distortion or unique textures.
Details of the product's five-year warranty.
To Next Page
