Art Tube MP Studio User Manual

- 1 -
The ART
TUBE MP STUDIO
TABLE OF CONTENTS
Introduction ......................................................................................... 2
Installation ........................................................................................... 3
AC Power Hookup ............................................................................. 3
Audio Connections ............................................................................ 3
Safety Precautions ............................................................................ 3
Controls and Indicators .......................................................................4
Input Control ...................................................................................... 4
+20 dB Gain Switch ........................................................................... 4
Phantom Power +48V Switch ............................................................ 4
Phase Reverse Switch ...................................................................... 5
OPL (Peak Limiter) Switch ................................................................ 5
Power/Clip/Limit LED ........................................................................ 6
VU Meter ........................................................................................... 6
Output Control ................................................................................... 6
Connections ........................................................................................ 7
¼” Input Jack...................................................................................... 7
XLR Input Jack .................................................................................. 7
XLR Output Jack ............................................................................... 7
¼” Output Jack .................................................................................. 8
Power Jack ....................................................................................... 8
Operation ............................................................................................. 9
Warranty Information ........................................................................ 10
Service ............................................................................................... 11
Tube MP Studio Specifications ........................................................ 12

Art Tube MP Studio Specifications

Connections

input connections	XLR (balanced), ¼”TS
output connections	XLR (balanced), ¼”TS
input impedance XLR	2K ohms
input impedance ¼”	840k ohms
output impedance XLR	600 ohms
output impedance ¼”	300 ohms

Audio Performance

maximum input level XLR	+14dBu
maximum input level ¼”	+22dBu
maximum output level XLR	+28dBu
maximum output level ¼”	+22dBu
CMRR	>75dB (typical @ 1kHz)
frequency response	10Hz to 30kHz, +/-.5dB
dynamic range	>100dB (20-20kHz) typical
total harmonic distortion (THD)	<0.1% (typical)
maximum gain XLR to XLR	60dB (typical)
maximum gain ¼” to ¼”	44dB (typical)
maximum gain XLR to ¼”	54dB (typical)
maximum gain ¼” to XLR	50dB (typical)
equivalent input noise (EIN) XLR to XLR	-129dBu (A weighted)
equivalent input noise (EIN) ¼” to ¼”	-105dBu (A weighted)

Power

tube type	12AX7A, Dual Triode, Hand Selected
power requirements USA	9VAC @ .8A (typ.)
export units configured for country of destination	Yes

Weight and Dimensions

dimensions	5.0”H x 5.5” W x 2.0”H
weight	1.5 lbs

Summary

Installation and Setup

AC Power Connection

Connects the external 115 VAC power supply. Ensure correct voltage and polarity.

Safety Precautions

Advises against moisture, removal of cover, and recommends using the correct power adapter.

Controls and Indicators Overview

Phantom Power (+48V) Switch

Powers microphones requiring +48V DC, applied/removed slowly to prevent damage.

OPL (Peak Limiter) Switch

Engages the Output Protection Limiter to control peak signal levels and prevent clipping.

Operating the Tube MP Studio

Service and Troubleshooting

Troubleshooting and Support Contact

Steps to identify issues, describe problems, and contact customer service for assistance or repairs.

Service Shipping Instructions

Guidelines for packing, shipping, and including necessary documentation for unit service.

Tube MP Studio Specifications