Do you have a question about the Art Tube MP Studio V3 and is the answer not in the manual?
input connections | XLR (balanced), ¼”TS |
---|---|
output connections | XLR (balanced), ¼”TS |
input impedance | XLR, ¼” 2K ohms, 840k ohms |
output impedance | XLR, ¼” 600 ohms, 300ohms |
maximum input level XLR | +14dBu |
---|---|
maximum input level ¼” | +22dBu |
maximum output level XLR | +28dBu |
maximum output level ¼” | +22dBu |
CMRR | >75dB (typical @ 1kHz) |
frequency response | 10Hz to 30kHz, +/-.5dB |
dynamic range | >100dB (20-20kHz) typical |
total harmonic distortion (THD) | <0.1% (typical) |
maximum gain XLR to XLR | 70dB (typical) |
maximum gain ¼” to ¼” | 54dB (typical) |
maximum gain XLR to ¼” | 64dB (typical) |
maximum gain ¼” to XLR | 60dB (typical) |
equivalent input noise (EIN) XLR to XLR | -129dBu (A weighted) |
equivalent input noise (EIN) ¼” to ¼” | -105dBu (A weighted) |
tube type | 12AX7A, Dual Triode, Hand Selected |
---|---|
power requirements USA | 9VAC @ 0.8A (typ.) |
export units power configuration | Configured for country of destination |
dimensions | 5.0”H x 5.5” W x 2.0”H |
---|---|
weight | 1.5 lbs |
Important warnings to avoid shock or fire, and servicing guidelines.
Sets the amount of input gain and controls two distinct gain ranges.
Selects the gain range for the input control, adding 20dB when engaged.
Powers microphones needing +48V DC Phantom power via XLR input.
Reverses the phase of the audio signal for XLR and 1/4 outputs.
ART's proprietary technology providing optimized settings for various instruments.