Art Tube MP Studio V3 Specifications

The Tube MP Studio V3™ features ART's new V3™ (Variable Valve Voicing™) Technology - found
only in ART microphone preamplification systems.
V3™ provides optimized reference points to begin the recording process. The V3™ presets
were created and fine-tuned by some of the industry's top studio and live-sound engineers,
along with our veteran engineering department. V3™ allows you to select between a
multitude of preamp settings designed for guitars (electric and acoustic), keyboards, bass
guitars, drums, vocals and more. V3™ gives you incredible presets for every instrument you
record, so all your recordings will sound professional.
The Tube MP Studio V3™ also features ART's OPL™ Output Protection Limiter, which precisely
and accurately controls and maintains the output peak signal. The OPL circuitry is crucial in
protecting the next link in a signal chain - such as a hard-disk recording system or a sound
card.
Whether you're working with a computer, hard-disk, or digital multitrack recorder, the Tube MP
Studio V3's design delivers professional recording studio results at a fraction of the cost of
comparable equipment. While its primary application is to be used with a microphone, the
Tube MP Studio V3 is an exceptional direct box - impedance matching, amplifying and
improving the sound of any instrument plugged into it.
Tube Microphone Preamp with V3 - Variable Valve Voicing™™
TUBE MP STUDIO V3™
TUBE MP STUDIO V3TUBE MP STUDIO V3
FEATURES:
PROVIDES SUPERIOR
PREAMPLIFICATION FOR:
MICROPHONES, INSTRUMENTS
AND LINE LEVEL SOURCES
V3™ -
VARIABLE VALVE VOICING
OPL™ -
OUTPUT PROTECTION LIMITER
HAND SELECTED 12AX7A
PROVIDES OVER 70DB
OF GAIN
SMOOTH, WARM AND
FAT SOUND QUALITY
VARIABLE INPUT AND
OUTPUT GAIN CONTROLS
EXCELLENT AS A TUBE DI
XLR AND 1/4"
INPUTS AND OUTPUTS
+48 VOLTS
PHANTOM POWER
PHASE REVERSAL SWITCH
TEC-AWARD
NOMINATED DESIGN
1 YEAR WARRANTY
DESIGNED FOR
YEARS OF
CONTINUOUS,
RELIABLE
PERFORMANCE
RUGGED ALL-STEEL
CONSTRUCTION
APPLICATIONS:
Features and specifications subject to change without prior notice.
Copyright 2002 Applied Research and Technology.
APPLIED RESEARCH AND TECHNOLOGY, 215 TREMONT STREET, ROCHESTER, NY 14608 USA
Voice: 585/436.2720, Fax: 585/436.3942, http://www.artproaudio.com
Dimensions: 5.0"D x 5.5"W x 2.0"H
Weight: 1.5 lbs
Dynamic Range: >100dB (20Hz to 20kHz)
Frequency Response: 10Hz to 20kHz (+0,-1dB)
THD: <0.1% (typical) > CMMR: >75dB (typ @1kHz)
EIN: -129dBu ('A' weighted XLR to XLR)
Maximum Gain: 70dB (XLR to XLR typical)
Maximum Input Level: +14dBu (XLR), +22dBu (1/4")
Maximum Output Level: +28dBu (XLR), +22dBu (1/4")
Input Impedance: 2k ohms (XLR), 840K ohms (1/4")
Output Impedance: 600 ohms (XLR), 300 ohms (1/4")
Power Requirements: 9 VAC @ 700ma (typ)
Professional, Project and Home Recording - Computer, Hard Disk, Analog and Digital Recording.
Live Sound Systems/PA, Permanent/Fixed Installations, Church, Club and Practice PA Systems
DJ Sound Systems, Monitor Systems
SPECIFICATIONS:

Art Tube MP Studio V3 Specifications

Connections and Impedance

input connections	XLR (balanced), ¼”TS
output connections	XLR (balanced), ¼”TS
input impedance	XLR, ¼” 2K ohms, 840k ohms
output impedance	XLR, ¼” 600 ohms, 300ohms

Audio Performance

maximum input level XLR	+14dBu
maximum input level ¼”	+22dBu
maximum output level XLR	+28dBu
maximum output level ¼”	+22dBu
CMRR	>75dB (typical @ 1kHz)
frequency response	10Hz to 30kHz, +/-.5dB
dynamic range	>100dB (20-20kHz) typical
total harmonic distortion (THD)	<0.1% (typical)
maximum gain XLR to XLR	70dB (typical)
maximum gain ¼” to ¼”	54dB (typical)
maximum gain XLR to ¼”	64dB (typical)
maximum gain ¼” to XLR	60dB (typical)
equivalent input noise (EIN) XLR to XLR	-129dBu (A weighted)
equivalent input noise (EIN) ¼” to ¼”	-105dBu (A weighted)

Power and Tube Specifications

tube type	12AX7A, Dual Triode, Hand Selected
power requirements USA	9VAC @ 0.8A (typ.)
export units power configuration	Configured for country of destination

Weight and Dimensions

dimensions	5.0”H x 5.5” W x 2.0”H
weight	1.5 lbs