Art Tube MP Studio V3 - Output Level Control

- 7 -
The VU Meter also reflects the impact of the OPL™ circuitry on the
signal. For example, if the signal is “in the red” on the meter, the meter
will reflect the attenuation of the signal when the OPL™ is activated,
and the signal is brought out of the “red”.
OUTPUT CONTROL
The Output Control sets the output level of the Tube MP Studio V3™.
When the control is fully counterclockwise, there is no output. Turning
the control clockwise increases the level of the output signal. When
setting the Output level control, refer to the VU Meter for an accurate
level leaving the Tube MP Studio V3™.