Need help?Do you have a question about the Artillery HORNET and is the answer not in the manual?
General| Print Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Build Volume | 220 x 220 x 250 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 80°C |
| Machine Dimensions | 470 x 410 x 450 mm |
| Layer Resolution | 0.1 - 0.3 mm |
| Connectivity | USB |
| Supported Materials | PLA, TPU, ABS, PETG, Wood |
| Printing Speed | 60 mm/s |
| Display | LCD Screen |
| Power Supply | 24V |
Important safety precautions including electrical, burn, fire, pinch, and static charge hazards.
Details about the limited warranty for the 3D printer.
Terms regarding manual updates, modifications, and liability.
Copyright and trademark information for the manual's content.
Attach the XZ gantry to the base of the printer.
Slide and fix the spool holder onto the printer base.
Configure printer dimensions and basic settings for the Artillery Hornet in Cura.
Load custom print profiles from the memory card into the slicing software.
To Next Page
