Need help?Do you have a question about the Artillery Sidewinder X2 and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Print Speed | 60 - 150 mm/s |
| Filament Diameter | 1.75 mm |
| Supported Filament Types | PLA, ABS, TPU, PETG, Wood |
| Extruder Type | Direct Drive |
| Max. Nozzle Temperature | 260°C |
| Max. Bed Temperature | 110°C |
| Frame Material | Aluminum |
| Display Screen | Color Touch Screen |
| Machine Dimensions | 550 x 405 x 640 mm |
| Connectivity | USB, SD Card |
| Bed Leveling | Automatic |
| Power Supply | 110V/220V |
Avoid opening printer's electronics bay while powered; unplug before access.
Do not touch hot components or fresh filament; allow cooling time.
Align XZ gantry to base, ensuring correct connector alignment.
Fasten XZ gantry to base using M5 screws and Allen key.
Adjust carriage wheels for proper seating on aluminum extrusions.
Adjust eccentric nuts for bed and hotend carriage alignment.
To Next Page
