Aruba 610 Series User Manual

610 Series Campus Access Points | Installation Guide 1
610 Series Campus Access Points
Installation Guide
The Aruba 610 Series Campus Access Points are high-performance, dual-radio tri-band devices that support the
IEEE 802.11ax WLANstandard in the 6GHz band (Wi-Fi 6E) as well as the 5GHz and 2.4GHz bands. Addi-
tionally, this series delivers capacity with MIMO (Multiple-Input, Multiple-Output) and OFDMA (Orthogonal Fre-
quency Division Multiple Access) technologies while also supporting IEEE 802.11a/b/g/n/ac wireless devices.
Hardware Overview
Figure 1 AP-615 Access Point Front View

Aruba 610 Series Specifications

General

Brand	Aruba
Model	610 Series
Category	Wireless Access Point
Language	English

Summary

Hardware Overview

LED Status Indicators

System Status LED

Details system status based on LED color and blinking patterns.

Radio Status LED

Indicates radio status for 2G, 5G, and 6G bands.

Device Ports and Interfaces

Console Port

Ethernet Ports

Device Operation and Setup

Reset Button Functions

How to reset the access point to factory defaults or toggle LED display.

Power Options

Details Power over Ethernet (PoE-in) and power source requirements.

Access Point Installation

Software and Connectivity Verification

Software Requirements

Verifying Connectivity

Using LEDs and guides to confirm successful network connectivity.

Regulatory Information

RF Safety and Compliance

Covers RF radiation exposure limits and installation requirements.

EU & UK Regulatory Conformity

Operational Restrictions

FCC Indoor Use Restriction

Contact Aruba

Contacting Support