Safety and regulatory information for Aruba 6400 PSUs
Item Range
Safety-EU:
EN 60950-1:2006 +A11:2009 +A1:2010
+A12:2011 +A2:2013
EN62368-1, Ed.2
Safety-World Wide:
IEC 60950-1:2005 Ed.2; Am 1:2009+A2:2013
IEC62368-1, Ed. 2
IEC 60825-1:2014 (Applies to products with lasers)
North American: UL60950-1, CSA 22.2 No 60950-1
UL62368-1 Ed. 2
NOTE: Environmental and other switch and modular power supply specications, such as acoustics
data, are included in the latest Installation and Getting Started Guide for your switch.
Shock hazard
CAUTION: Shock hazard. To completely remove power from the switch, disconnect all power cords.
Indoor wiring warning
This product and all interconnected equipment must be installed indoors within the same building, including all
associated LAN connections as described by Environment A of the IEEE 802.3af standard.
WARNING: Interior Wiring.
Australia/EU/New Zealand EMC Class A warning
This product is a class A product. In a domestic environment, this product may cause radio interference in which
case the user may be required to take adequate measures.
Belarus Kazakhstan Russia marking
For manufacturer and local representative information, see Safety and Compliance Information for Server, Storage,
Power, Networking, and Rack Products at http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts.
Page 4
To Next Page
Loading...
