Need help?Do you have a question about the Aruba 6000 series and is the answer not in the manual?
General| Model | Aruba 6000 Series |
|---|---|
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Uplink Ports | 4 SFP+ ports |
| PoE | Available on some models (PoE+) |
| Switching Capacity | 176 Gbps |
| Layer | Layer 2/3 |
| Management | CLI, SNMP |
| Input Voltage | 100-240VAC |
| Power Supply | Internal |
| Ports | 24 or 48 10/100/1000BASE-T ports |
Outlines the general features of the Aruba 6000 Series Mobility Controller.
Describes the physical elements and components of the Aruba 6000 series system.
Lists all necessary components and tools required before installing the Aruba 6000 series.
Details safety precautions and warnings for electrical hazards and static discharge.
Specifies minimum hardware configuration and rack mounting kit requirements.
Provides step-by-step instructions for attaching rack mounting brackets and mounting the chassis.
Details the procedure for connecting power to the Aruba 6000 series.
Outlines the power-on test procedure to verify correct installation and operation.
Provides step-by-step instructions for installing a Supervisor Card.
Guides on safely removing a Supervisor Card from the chassis.
Describes optional serial and Power Over Ethernet (SPOE) capabilities of specific line cards.
Provides step-by-step instructions for installing a line card into the chassis.
Guides on safely removing a line card from the chassis.
Helps determine the type and number of power supplies needed based on total power requirements.
Provides worksheets to calculate the total power demand on site electrical circuits.
Provides step-by-step instructions for installing a power supply into the chassis.
Guides on safely removing a power supply from the chassis.
Provides safety notices regarding lithium batteries and laser products.
To Next Page
