Need help?Do you have a question about the Aruba 6300F Series and is the answer not in the manual?
General| Model | Aruba 6300F Series |
|---|---|
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Stacking | Yes, up to 10 switches in a stack with VSF (Virtual Switching Framework) |
| Layer | Layer 3 |
| Management | Aruba Central, CLI, SNMP |
| Input Voltage | 100-240VAC |
| Fans | Redundant fans |
| Dimensions (W x D x H) | 440 x 420 x 44 mm (17.3 x 16.5 x 1.7 in) |
| Operating Humidity | 5% to 95% non-condensing |
| Security Features | ACLs |
| Layer 3 Features | Static routing, OSPF, RIP, VRF |
| Ports | 24 or 48 10/100/1000BASE-T ports |
Lists the switch models covered in this guide.
Lists other relevant documentation for the switch series.
Details front panel elements like ports, LEDs, and buttons.
Covers rear panel elements including power supplies and fans.
Highlights key functionalities and capabilities of the switches.
Details on various network port types and their specifications.
Explanation of front panel LED behavior for status and diagnostics.
Information on fan requirements and power supply units.
Steps for installing the 6300 series switches, including precautions.
General instructions and specific methods for physically mounting the switch in various locations.
Guides for connecting the switch to power sources and network cables.
Guidance on installing SFP/SFP+ transceivers for fiber optic connectivity.
Basic configuration steps for network access and security settings.
Reference to further details for initial switch configuration.
Procedure for replacing a failed fan module in the switch.
Steps for replacing a failed power supply unit in the switch.
Common issues and initial checks for troubleshooting switch problems.
How to interpret front and rear panel LED behavior for diagnosing problems.
Step-by-step solutions for common switch problems and hardware issues.
Methods for testing network cables, switch-to-device, and end-to-end communications.
Steps to reset the switch to its original factory settings.
Details on switch dimensions, weight, and environmental operating conditions.
Electrical ratings, power supply details, and AC/DC voltage requirements.
Sound power and pressure levels for different switch models.
Safety compliance information for lasers and general electrical safety standards.
Standards and compliance for various network technologies and interfaces.
Details on supported cable types and their specifications for network connections.
Specifies maximum supported cable lengths for different network technologies.
Pin assignments and wiring details for twisted-pair Ethernet cables.
How to contact Aruba support and gather necessary information.
Link to the portal for downloads, updates, and support.
Information on product warranty, safety, and regulatory compliance.
To Next Page
