Need help?Do you have a question about the Aruba 6300M Series and is the answer not in the manual?
General| Model | Aruba 6300M Series |
|---|---|
| Management | Aruba Central, CLI, Web GUI, SNMP |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Input Voltage | 100-240 VAC |
| Flash | 16 GB |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Relative Humidity | 5% to 95% non-condensing |
| AC Input Frequency | 50/60 Hz |
| Warranty | Limited Lifetime Warranty |
| Ports | 24 or 48 ports |
| Power over Ethernet | Yes, up to 30W per port (PoE+) or 60W per port (PoE++) |
| Memory | 8 GB |
| Altitude | Up to 3, 000 m (9, 843 ft) |
| Security | MACsec, 802.1X, RADIUS |
| Layer 2 Features | VLAN, STP, LACP |
Step-by-step guide for installing the Aruba 6300 switch models.
Crucial safety and procedural advice for installing the switch to prevent damage or injury.
Detailed steps for installing power supplies in modular switch configurations.
Procedures to confirm the switch initializes and operates properly after power-up.
Explains various methods and restrictions for physically mounting the switch.
Instructions for connecting the switch to AC or DC power sources.
Details the essential steps for basic switch configuration.
Instructions for removing and replacing a faulty fan module in the switch.
Guides on how to remove and install replacement power supply units.
Outlines methods for testing the switch's hardware components.
Covers laser safety standards and general electrical safety compliance.
To Next Page
