What to do if the Aruba Instant On 1930 link light does not light when a cable is connected?
If the link light on your Aruba Switch doesn't illuminate after connecting a cable, begin by checking for loose or visibly damaged connections. Ensure all connections are secure. If the issue persists, try using a different cable.
General| Model | Aruba Instant On 1930 Series |
|---|---|
| Switching Capacity | Up to 176 Gbps |
| Layer | Layer 2+ |
| MAC Address Table Size | 16K entries |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Ports | 8, 24, or 48 10/100/1000BASE-T ports |
| Uplink Ports | 2 or 4 SFP/SFP+ ports |
| PoE Options | PoE and non-PoE models available |
| Management | Cloud-managed with Aruba Instant On mobile app or web portal |
| Mounting | Rack-mountable |
| Jumbo Frame Support | 9216 bytes |
| Layer 2 Features | VLANs |
| Security Features | Access Control Lists (ACLs) |
| Power Supply | Internal power supply |
| Humidity | 15% to 95% non-condensing |
| Certifications | CE |
Explains the Power Over Ethernet functionality, including power modes and priority values.
Details the power delivery capabilities and standards supported by the 1930 switch series.
Advises reading all relevant documentation before proceeding with switch installation to prevent injury or damage.
Offers crucial precautions and guidelines to ensure safe and proper installation of the switch.
Guides on ensuring the physical environment and network cabling are ready for switch installation.
Summarizes the overall steps for installing the switch, from site prep to connecting devices.
Explains the various physical mounting methods for the Aruba Instant On 1930 switches.
Guides on how to connect the switch to an AC power source for operation.
Explains how to connect network devices to the switch using RJ-45 ports and SFPs.
Outlines the steps to access the switch's web interface for initial setup and configuration.
Details how to connect to the switch using its default IP address if DHCP fails.
Introduces the troubleshooting section and lists the key topics covered.
Provides common problems and their resolutions for initial switch troubleshooting.
To Next Page