Aruba Instant On 1930 Series User Manual

The Aruba Instant On 1930 Switch series are designed to meet the needs of small business network
envir
onments - simple to setup and manage, secure and reliable. Aruba Instant On deployments can be
managed through a Mobile App supported on iOS and Android, a cloud portal that is accessible through a
web browser, or a local web GUI.
These switches are intended for indoor use only. The switches comply with the safety standard IEC 60950-1,
2nd Edition and IEC 62368-1 2nd Edition. A tool is required to remove the top cover; however, the product is
not considered serviceable by an operator. These switches can be directly connected to computers, printers,
and servers to provide dedicated bandwidth to those devices, and you can build a switched network
infrastructure by connecting the switch to hubs, other switches, or routers. In addition, these switches oer
network management capabilities.
Switch hardware features
Figur
e 1: JL680A
Item Description
1 1GbE RJ45 ports with Link/Status LED per port
2 1GbE SFP port with Link/Status LED
3 Cloud Status LED
4 Global Status LED
5 UID LED
6 Speed Mode LED
Table Continued
6 Aruba Instant On 1930 Installation and Getting Started
Guide
Overview

Aruba Instant On 1930 Series Specifications

General

Model	Aruba Instant On 1930 Series
Switching Capacity	Up to 176 Gbps
Layer	Layer 2+
MAC Address Table Size	16K entries
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Ports	8, 24, or 48 10/100/1000BASE-T ports
Uplink Ports	2 or 4 SFP/SFP+ ports
PoE Options	PoE and non-PoE models available
Management	Cloud-managed with Aruba Instant On mobile app or web portal
Mounting	Rack-mountable
Jumbo Frame Support	9216 bytes
Layer 2 Features	VLANs
Security Features	Access Control Lists (ACLs)
Power Supply	Internal power supply
Humidity	15% to 95% non-condensing
Certifications	CE