Need help?Do you have a question about the Aruba 8360 Series and is the answer not in the manual?
General| Model | Aruba 8360 Series |
|---|---|
| Layer | Layer 2/3 |
| PoE | No |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Operating Humidity | 5% to 95% non-condensing |
| Forwarding Rate | Up to 5, 952 Mpps |
| Power Supply | Dual, hot-swappable power supplies |
| Redundancy | Redundant power supplies and fans |
| Management | ArubaOS-CX, REST API, CLI, Web GUI, SNMP |
| Security | ACLs |
| Throughput | Up to 5, 952 Mpps |
| Input Voltage | 100-240VAC |
| Latency | Less than 1µs |
| Fans | Hot-swappable fans |
Lists the Aruba 8360 switch models and compatible accessories.
Lists other Aruba documentation relevant to the switch.
Provides an overview and describes front/back panel components of the 8360 switches.
Details network port types, QSFP28 split mode, and management ports (Console, OOBM, USB).
Explains front panel LEDs, LED modes, behavior, and product label information.
Describes power supplies, their status LEDs, load sharing, redundancy, and fan trays.
Summarizes the main features and capabilities of the Aruba 8360 switches.
Lists package contents and optional accessories like rack mount kits.
Outlines step-by-step installation procedures and essential safety guidelines.
Guides for installing power supplies and fan trays.
Covers two-post, four-post rack mounting and air duct kit installation.
Instructions for installing transceivers, connecting power/network, and initial setup.
Steps to configure a terminal emulator and connect to the switch's console port.
Provides the pinout details for the RJ-45 to DB-9 console cable.
Detailed steps for removing and installing power supply units safely.
Detailed steps for removing and installing fan trays safely.
Covers common issues, LED interpretation, and diagnostic tips for troubleshooting.
Guides on performing tests for switch-to-device, end-to-end communication, and system reset.
Details physical dimensions, weight, and electrical properties of the switches.
Lists power figures, cord info, operating conditions, and acoustic levels.
References safety documents, regulatory compliance, and connectivity standards.
Recommends cable types and categories for various network speeds and environments.
Specifies supported distances for different network technologies and cable types.
Provides contact info for support and procedures for accessing software updates.
Guides on accessing warranty, regulatory info, and providing documentation feedback.
To Next Page
