Need help?Do you have a question about the Aruba 3810M and is the answer not in the manual?
General| Model | Aruba 3810M |
|---|---|
| Layer | Layer 3 |
| Input Voltage | 100 - 240 VAC |
| Flash Memory | 4 GB |
| SDRAM | 4 GB |
| Ports | 24 or 48 Gigabit Ethernet ports |
| Stacking | Yes, up to 10 switches |
| Power over Ethernet | PoE+ (IEEE 802.3at) support |
| Management | Aruba Central, Web GUI, CLI |
| Dimensions | 17.32 x 17.5 x 1.72 in (440 x 445 x 43.7 mm) |
| PoE Budget | 740W (PoE+) or 1140W (PoE++) |
| Memory and Processor | Dual-core CPU |
| Power Supply | Redundant power supply options |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Operating Humidity | 15% to 95% non-condensing |
| Jumbo Frame Support | Yes, up to 9220 bytes |
| Power Consumption | Varies by model |
Instructions for unpacking and verifying included switch components.
Guidance on preparing the switch and environment for installation.
Key safety warnings and advice for installing network equipment.
Warning regarding electrical shock risk during installation and operation.
Warning that the switch is for indoor use only.
Regulatory statement for Brazil regarding grounded power outlets.
Notice about battery failure indicators and replacement procedures.
To Next Page
