Do you have a question about the Aruba JL320A and is the answer not in the manual?
Product Number | JL320A |
---|---|
Product Series | Aruba 2930F |
Device Type | Switch |
Power over Ethernet (PoE) | Yes |
PoE Budget | 370W |
Switching Capacity | 176 Gbps |
Jumbo Frame Support | Yes |
Layer | Layer 2 |
Operating Temperature | 32°F to 113°F (0°C to 45°C) |
DRAM | 512 MB |
Input Voltage | 100-240 VAC |
MAC Address Table Size | 32K |
Memory | 512 MB |
Management | CLI, SNMP |
Operating Humidity | 10% to 90% non-condensing |
Essential safety and operational guidelines to prevent injury or product damage during installation.
Steps to unpack the switch and verify all included components are present.
Instructions for installing a power supply and powering on the switch for the first time.
Procedure for installing the switch in a two-post rack, including bracket attachment.
Steps for placing the switch on a flat surface using adhesive pads, avoiding tripping hazards.
Guidance on connecting console and network cables, and installing transceivers.
Procedure for installing uplink modules on the rear panel of the switch.
Procedure for installing stacking modules to enable switch stacking functionality.
Important considerations for using transceivers, including compatibility and hot-swapping.
Information on obtaining and managing the latest software version for the switch.
Provides general pointers to safety, environmental, and regulatory details.
Details operating temperature, humidity, altitude, and non-operating conditions for the switches.
Lists safety standards (EU, World Wide, North America), laser safety, EMC, RoHS, and electrical characteristics.
Provides acoustic noise levels and power cord part numbers for PoE+ switches.
Details on power supply connections, shock hazards, and specific warnings for Japan and China altitude.
Information on battery handling, risks, and compliance for Japan's VCCI Class A standard.
Details specific compliance for Korea, EU, Belarus, Kazakhstan, Russia, and provides feedback channels.