Need help?Do you have a question about the Aruba JL322A and is the answer not in the manual?
General| Product Number | JL322A |
|---|---|
| Product Series | Aruba 2930F |
| Device Type | Switch |
| Ports | 24 |
| Uplink Ports | 4 |
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Processor | Dual-core |
| Layer | Layer 3 |
| Input Voltage | 100-240VAC |
| Input Frequency | 50/60 Hz |
| PoE Standard | IEEE 802.3af/at |
| Management | Simple Network Management Protocol (SNMP) |
| Dimensions (W x D x H) | 440 x 44 x 44 mm |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Power Supply | Internal |
| MAC Address Table Size | 32768 entries |
Key safety and operational guidelines to follow before installing the switch to prevent injury or damage.
Procedure for installing power supply units into the switch before initial power-on.
Steps to power on the switch and confirm successful completion of the initial self-test.
Detailed procedure for securely mounting the switch in a standard two-post rack.
Instructions for placing and securing the switch on a flat horizontal surface like a desk.
Guide on establishing network connectivity by connecting cables to the switch's data ports.
Crucial safety instructions for connecting and handling power supplies to prevent hazards.
To Next Page
