Need help?Do you have a question about the Aruba JL256A and is the answer not in the manual?
General| Product Number | JL256A |
|---|---|
| Product Series | Aruba 2530 |
| Device Type | Switch |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) Budget | 370W |
| Memory | 512 MB |
| Flash Memory | 256 MB |
| Layer | Layer 2 |
| Power Supply | Internal |
| Input Voltage | 100-240 VAC |
| Input Frequency | 50/60 Hz |
| MAC Address Table Size | 16000 entries |
| Jumbo Frame Support | Yes |
| Management | Web, CLI, SNMP |
| Dimensions (W x D x H) | 440 x 254 x 44 mm |
| Weight | 4.2 kg |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Memory and Processor | 512 MB DRAM, 256 MB Flash |
Details the different types of network ports and their specifications.
Explains the indicator lights on the switch and ports, detailing their behavior.
Provides a step-by-step guide for installing the switch.
Outlines important safety and environmental considerations before installation.
Details methods for rack mounting and horizontal surface mounting.
Outlines essential initial configuration steps for network access and security.
Offers common advice for resolving network and device issues.
Explains how to interpret LED patterns for fault finding and diagnostics.
Describes methods for testing the switch's hardware components and functionality.
To Next Page
