What to do if the Aruba JL680A Switch link light does not light when a cable is connected?
If the link light on your Aruba Switch doesn't illuminate after connecting a cable, begin by checking for loose or visibly damaged connections. Ensure all connections are secure. If the issue persists, try using a different cable.
General| Product Number | JL680A |
|---|---|
| Device Type | Switch |
| PoE | Yes |
| PoE Budget | 370W |
| Switching Capacity | 176 Gbps |
| Jumbo Frame Support | Yes |
| Switch Type | Managed |
| Uplink Ports | 4 x 1G/10G SFP Ports |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Power Supply | Internal |
| Product Series | Aruba |
| MAC Address Table Size | 32, 000 entries |
| Dimensions (W x D x H) | 440 x 300 x 44 mm |
Details physical components and indicators on the switch front panel for various models.
Advises users to read specific documentation and safety guidelines before installation.
Outlines the step-by-step process for installing the switch.
Provides instructions and considerations for mounting the switch in a standard rack or cabinet.
Details the steps and precautions for mounting the switch onto a wall.
Explains how to interpret LED patterns to diagnose switch problems.
Explains how to test the switch by resetting it and how to restore factory default settings.
To Next Page
