What to do if the Aruba JL684A Switch link light does not light when a cable is connected?
If the link light on your Aruba Switch doesn't illuminate after connecting a cable, begin by checking for loose or visibly damaged connections. Ensure all connections are secure. If the issue persists, try using a different cable.
General| Product Number | JL684A |
|---|---|
| Device Type | Switch |
| Ports | 48 |
| Uplink Ports | 4 x 10G SFP+ |
| Power over Ethernet (PoE) | Yes |
| Total PoE Budget | 740W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Power Supply | Internal |
| Stacking | Yes |
| Jumbo Frame Support | Yes |
| VLAN Support | Yes |
| Layer 3 Features | Static Routing, RIP, OSPF |
| Product Series | Aruba 2930F |
| PoE | Yes |
| PoE Budget | 740W |
| Input Voltage | 100-240V AC |
| PoE Standard | IEEE 802.3af |
| Management | Web, CLI, SNMP |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 95% non-condensing |
| Ports (Alternative) | 48 x 10/100/1000BASE-T |
| Memory and Processor | Dual-core processor |
| MAC Address Table Size | 32K |
Lists the specific Aruba Instant On 1930 switch models and their associated parts.
Details the physical components and indicators on the switch front panel.
Describes the types of network ports, including RJ45 and SFP/SFP+ slots.
Explains Power over Ethernet (PoE) functionality and power delivery capabilities.
Explains the status and meaning of various LEDs on the switch.
Important guidelines and sources to review before installing the switch.
Precautions to avoid personal injury and product damage during installation.
Detailed instructions for physically mounting the switch in various configurations.
Steps to connect the switch to a power outlet for operation.
How to connect network cables to the switch ports.
Step-by-step guide to accessing and configuring the switch.
Provides common problems and their quick solutions.
Explains how to interpret LED patterns for troubleshooting.
Steps to reset the switch to its original factory settings.
To Next Page
