Need help?Do you have a question about the Aruba 2930F 48G 4SFP and is the answer not in the manual?
General| Switching Capacity | 176 Gbps |
|---|---|
| Layer | Layer 3 |
| Uplink Ports | 4 x SFP |
| Power Supply | Internal |
| Memory and Processor | 512 MB flash |
| Input Voltage | 100 - 240 VAC |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 15% to 95% non-condensing |
| Ports | 48 x 10/100/1000BASE-T |
| Dimensions | 44.25 x 36.83 x 4.39 cm |
Safety, environmental, and general guidelines before installation.
Instructions for rack, surface, wall, and under-table mounting.
Guide to basic setup via console, including IP and password.
Managing the switch via IP using Telnet or web browser interface.
Common problems and initial checks for resolving issues.
Interpreting LED patterns for troubleshooting switch status.
Steps to restore the switch to its original factory settings.
How to access HPE technical support, documentation, and software updates.
To Next Page
