EasyManua.ls Logo

Aruba 6400 - Brazil Statement and Contact Information; Preview of Installing the PSU

Aruba 6400
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Brazil statement and contact information
WARNING: Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia
elétrica que possua aterramento (três pinos), conforme a Norma NBR ABNT 5410, visando a segurança
dos usuários contra choques elétricos.
Se você precisar de mais apoio, você pode entrar em contato conosco pelo Centro de Informações Hewlett Packard
Enterprise (0800-710-2029 / +55 11 2377-0002 / +55 11 2377-1002)
Chinese safety warning
For the Chinese safety warning, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack
Products at http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts.
European community
The product herewith complies with the requirements of Directive 2014/35/EU relating to electrical equipment
designed for use within certain voltage limits, Directive 2014/30/EU relating to electromagnetic compatibility,
Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment and carries the CE marking accordingly.
WARNING: This product is a class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
Japan VCCI Class A statement
Korea EMC Class A statement
사용자 안내문
기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서
가정용 환경에서 사용하는경우 전파간섭의 우려가 있습니다.
Taiwan EMC warning
Preview of installing the PSU
NOTE: This section previews the steps for installing the Aruba 6400 power supplies. To nd detailed
installation steps, information on conguration tools, and other instructions and information, see the
latest Installation and Getting Started Guide for your switch.
CAUTION: Always remove the power cord from an installed power Inlet Adapter before removing the
adapter from the switch. Do not connect a power cord to a power Inlet Adapter when the adapter is not
properly installed in the switch.
Page 5

Related product manuals