Aruba 9004 - Specifications, Safety, and Compliance; Aruba 9004 Gateway Specifications; Safety and Regulatory Compliance

Aruba 9004 Gateway | Installation Guide Specifications, Safety, and Compliance | 17
Chapter 3
Specifications, Safety, and
Compliance
Aruba 9004 Gateway Specifications
Physical
 Device Dimensions (without mounting brackets) (HxWxD): 3.82 cm x 19.85cm x 15.31 cm
 Device Weight: 2.519lbs (1.143 kg)
Electrical
 Ethernet
 4 x 100/1000BASE-T auto-sensing Ethernet RJ-45 Interfaces
 MDI/MDX
 Power
 12V DC power interface, supports powering through an 12V DC, 2.5A AC-to-DC power adapter.
Environmental
 Operating
 Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
 Humidity Range: 10% to 90% (RH), non-condensing
 Storage and Transportation
 Temperature Range: –40 °C to 70 °C (–40 °F to 158 °F)
 Humidity Range: 10% to 95% (RH), non-condensing
For additional specifications on this product, please refer to the data sheet. The data sheet can be
found at www.arubanetworks.com
Safety and Regulatory Compliance
Aruba, a Hewlett Packard Enterprise company provides a multi-language document that contains
country-specific restrictions and additional safety and regulatory information for all Aruba products.
This document can be viewed or downloaded from the following location: www.arubanetworks.com/
safety_addendum
Aruba gateways must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.
RF Radiation Exposure Statement: This equipment complies with RF radiation exposure limits. This equipment
should be installed and operated with a minimum distance of 7.874 inches (20cm) between the radiator and
your body for 2.4 GHz operations. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.