To Next PageTo Next Page
Need help?Do you have a question about the Arylic Up2Stream AMP and is the answer not in the manual?
General| Audio Outputs | Speaker terminals |
|---|---|
| Bluetooth Version | 5.0 |
| Ethernet | Yes |
| Speaker Impedance | 4-8 Ohms |
| Frequency Response | 20Hz-20kHz |
| USB Host | Yes |
| Multiroom | Yes |
| Sampling Rate | Up to 24bit/192kHz |
| Output Power | 2 x 50W (4Ω) |
| Audio Inputs | Bluetooth, USB, Aux |
| Network | WiFi, Ethernet |
| Power Supply | 24V/4A |
| Product Type | Amplifier |
| Stereo Output Power | 2 x 50W (4Ω) |
| Streaming Protocols | Spotify Connect, Airplay, DLNA, UPnP |
| Music Format | MP3, AAC, FLAC, WAV, APE |
| Signal-to-Noise Ratio | >90dB |
Details on WiFi, Ethernet, Bluetooth, and USB connectivity standards.
Specifications including frequency response, speaker power, THD+N, and impedance.
Information on power input, audio output, and speaker output connections.
Supported music formats, decoding capabilities, dimensions, and IR controller.
Instructions for downloading the 4STREAM app and configuring the device via WiFi.
Steps for connecting the device using a wired Ethernet cable.
Procedure for pairing the device with a mobile device via Bluetooth.
Guidance on performing firmware updates through the application.
