Asante FriendlyNet Installation Guide

8
Technical Specifications
These sections contain technical specifications for the FriendlyNet
Adapters, the AAUI and AUI connectors, Ethernet cabling.
FriendlyNet Adapter Specifications
Physical Dimensions
FriendlyNet 10T—3.5” x 1” x 1.8”
FriendlyNet BNC—3.5” x 1” x 1.8” (not including BNC connector)
FriendlyNet 10T/TN—3.5” x 1” x 1.8” (not including BNC connector)
FriendlyNet TN—3.5” x .75” x 1.4”
FriendlyNet TK—4” x .9” x 2.4”
Power
FriendlyNet 10T—60mA @5Vdc
FriendlyNet BNC—80mA @5Vdc
FriendlyNet TN—55mA @5Vdc
FriendlyNet 10T/TN—100mA @5Vdc
FriendlyNet TK—666mA @12Vac
LEDs
—Power
LI —Link integrity detected
Environmental
Operating temperature: 0-55 degrees C
Operating humidity: 5 to 85% non-condensing.
Storage temperature: -30-80 degrees C.
Storage humidity: 5-90%, non-condensing.
Standards Compatibility
Full compliance with the IEEE 802.3 Ethernet specifications for
unshielded twisted-pair (10BaseT), thin-coaxial (10Base2) and thick-coax-
ial (10Base5) media.
Hardware Supported
Support of all computers and printers with a built-in AAUI Ethernet port,
including the Power Macintosh® family, Macintosh Quadra® family,
Zenith Data Systems® portable, IBM ThinkPad® 300 portable and Apple
LaserWriter® printers with built-in Ethernet.
friendlynet BOOK Page 8 Thursday, October 16, 1997 10:37 AM

Asante FriendlyNet Specifications

General

Brand	Asante
Model	FriendlyNet
Category	Switch
Language	English