Page 4-2
Troubleshooting
Cannot find FriendlyNet PC Card in EtherPeek "Interfaces Avail-
able" List.
❏
Make sure you are using EtherPeek version 3.x or higher.
❏
If a modem is inserted in the other PC slot, eject the
modem prior to running EtherPeek on the FriendlyNet PC
Card.
No "EtherTalk Alternative" icon in the Network Control Panel.
❏
Check if the Apple EtherTalk software is installed. If it is
not, install the EtherTalk software using your MacOS Sys-
tem Software Installation diskettes. (You can use the
"Floppy Disk Maker" application in the Utilities folder in
your PowerBook.)
To Next Page
Loading...
