TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
105
8.7.5 Module Fault List
It is possible to change the severity level on alarms and events generated in the IP-DECT
system.
1 Select UNITE > Module Fault List. A list of alarms and events generated in the IP-
DECT system is shown with their fault codes (IP-DECT code and Unite code). Alarms
are listed with a Yes and events are listed with a No in the column Persistant.
2 To change the severity level on an alarm/event: Select in the Seriousness drop-down
list one of the following:
• Disabled (The alarm/event will not be sent to the Unite system.)
• Information
• Warning
• Error
• Critical
3 Click "OK".
Except for severity level Disabled, the alarm/event will be sent to the Unite system
with changed severity level.
8.8 Import and Export a Central Phonebook
Note: If the phonebook functionality in the IPBS/IPBL is enabled, then the SMS feature in
the IMS3/Unite CM is disabled. If an IMS3/Unite CM is connected, the central phonebook
should be located in the IMS3/Unite CM instead of the IPBS/IPBL.
Import Entries to the Central Phonebook from a csv file
Note: A csv file can contain max 1000 users.
The csv file to be imported to the phonebook shall have the following format:
First name 1
;Last name 1;Telephone number 1
First name 2
;Last name 2;Telephone number 2
or
First name 1
,Last name 1,Telephone number 1
First name 2
,Last name 2,Telephone number 2
Note: When importing a central phonebook file in csv format, existing entries are deleted.
1 Select "Central Phonebook".
2 Select the Enable check box.
3 Select file type for the csv file in the File Type drop-down list.
4 If so needed, select separator for the csv file in the Delimeter drop-down list.
5 Click "OK". The options Import and Export are displayed.
6 Select Import > Choose File.
7 Locate the csv file in the system and select Open > Next. Make sure the correct
number of entries are correct.
8 Click "Close"
To Next Page
Loading...