TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
58
7.13.3 Easy Registration
Easy Registration is done in two steps. First, the users are registered in the IP-DECT System
through an import of a csv file. Second, the handset is assigned automatically to the user
from the handset.
Add users in the IP-DECT System
If many users should be added it is possible to import a csv file with the IPEI / IPDI.
The csv file may have the following format:
Long Name;Name;Number;Display Name;Auth Name (SIP);Idle Display;IPEI/IPDI;Password;
Different separators may be used in a delimiter-separated file. Import of files with the
separators semicolon or TAB is supported.
1 Select Users.
2 Click “Import”.
3 Click “Browse” to locate the csv file.
4 Click Open > Next Make sure the correct number of entries are correct.
5 Click Next
Limitations
• Maximum 1000 rows in the csv file.
• The maximum csv file size is 128 Kb. If the file is to large, divide the file into several
files.
• Only the new user data is imported. The old user data is not deleted.
• Existing user data cannot be updated.
• If the separator is wrong an error message will be displayed.
Field name Description
Max.
characters
• Long Name Mandatory, the name of the user, need to be unique
throughout the system.
30
• Name Optional, the user name. 30
• Number Mandatory, the phone number extension, need to be
unique throughout the system.
30
• Display
Name
Optional and only available when using the Ascom
VoIP Gateway, the calling or called party name will be
shown in the handset display (depending on whose
handset).
30
• Auth Name
(SIP)
Optional 30
• Idle Display Optional, will be showed in the handset display when
the handset is idle.
47
• IPEI / IPDI Mandatory, the unique identification number of the
handset.
• Password Optional, is used for registration towards the
gatekeeper.
15
To Next Page
Loading...