Ascon Tecnologic - KM3 - L - ENGINEERING MANUAL - PAG. 14
8. GENERAL NOTES
8.1 PROPER USE
Every possible use not described in this manual must be
consider as a improper use.
This instrument is in compliance with EN 61010-1 “Safety
requirements for electrical equipment for measurement,
control and laboratory use”; for this reason it coud not be
used as a safety equipment.
Whenever a failure or a malfunction of the control device
may cause dangerous situations for persons, thing or
animals, please remember that the plant has to be equipped
with additional safety devices.
Ascon Electronic and its legal representatives do not assume
any responsibility for any damage to people, things or animals
deriving from violation, wrong or improper use or in any case
not in compliance with the instrument’s features.
8.2 WARRANTY
This product is under warranty against manufacturing
defects or faulty materials that are found within 18 months
from manufacturing date. The warranty is limited to the
replacement of the instrument.
The tampering of the instrument or an improper use of the
product will bring about the immediate withdrawal of the
warranty’s effects.
In the event of a faulty instrument, either within the period
of warranty, or further to its expiry, please contact our
sales department to obtain authorisation for sending the
instrument to our company.
8.3 DISPOSAL
The appliance (or the product) must be
disposed of separately in compliance
with the local standards in force on
waste disposal..