ascon G2 Series User Manual

27
4 - Operation
4.4 ACCESS LEVEL - PASSWORD - CALIBRATION
NO
YES
Access
menu
Enter password
for access enable
Access to all the levels
[1]
Execute
the following operations
A/M enable
/
nO
Note
Pressing í
go back to the Operator mode
[1] With the level of access set to full, all
the related parameters are displayed.
from -999 to 9999
(11 default value from factory)
If the password entered corre-
sponds to the one stored in the
A.pas [A] parameter, the access
configuration page is displayed.
Press until
Operator
mode
Ac.le Ac.le
E.AMn
275.8
A.pas
Menu
II
274.8 Accs
OK
Ac.le
fUll
EHec
none
yes
C.pas
Oper
EHec
C.pas
33
A.pas
Edit
EHec
A.pas
II
Operator
level Access
Change the
Configuration password
Enter
the Configuration
password
Access to the edit level
Change
the Access password
Enter [A]
the Access password
M5 UK•ed4 10-12-2004 16:20 Pagina 27

ascon G2 Series Specifications

General

Brand	ascon
Model	G2 Series
Category	Controller
Language	English