2
Indications
cc
NOTES
ON ELECTRIC
SAFETY AND
ELECTROMAGNETIC
COMPATIBILITY
Please, read carefully these instructions before proceeding with the instal-
lation of the controller.
Class II instrument, real panel mounting.
This controller has been designed with compliance to:
Regulations on electrical apparatus (appliance, systems and installations)
according to the European Community directive 73/23/EEC amended by the
European Comunity directive 93/68/EEC and the Regulations on the essen-
tial protection requirements in electrical apparatus EN61010-1 : 93 + A2:95.
Regulations on Electromagnetic Compatibility according to the European
Community directive n089/336/EEC, amended by the European Community
directive n° 92/31/EEC, 93/68/EEC, 98/13/EEC
and the following regulations:
Regulations on RF emissions
EN61000-6-4 : 2001 industrial environments
Regulation on RF immunity
EN61000-6-2 : 2001 industrial equipment and system
It is important to understand that it’s responsibility of the installer to ensure
the compliance of the regulations on safety requirements and EMC.
The device has no user serviceable parts and requires special equipment
and specialised engineers. Therefore, a repair can be hardly carried on direct-
ly by the user. For this purpose, the manufacturer provides technical assistance
and the repair service for its Customers.
Please, contact your nearest Agent for further information.
All the information and warnings about safety and electromagnetic com-
patibility are marked with the
B sign, at the side of the note.
M5 UK•ed4 10-12-2004 16:20 Pagina 2
To Next Page
Loading...
Need help?
General
