AC112Q-3, AC125Q-3, AC150Q-3, and AC165Q-3 Operations Manual.... 26
6 OPERATION
6.1 POWER TURN-ON PROCEDURE
Close the shore power (input) circuit breaker or switch to the converter. Turn the disconnect (14)
switch to the ON position. After 1-3 seconds, fans will be heard, and the display will become
active. Allow the converter to initialize (the display LOAD LEVEL field will change from 0.0 %
to a small reading after initialization) before attempting to operate it.
Figure 5: FRONT PANEL CONTROLS
To Next Page
