Ashford e-Spinner Super Jumbo - User Manual

Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
INSTRUCTIONS
e-Spinner Super Jumbo
ESPSJ08082019V2

Summary

Assembly Instructions

Lubrication Guide

Recommendations for applying Ashford Spinning Wheel Oil to bearings and motor.

Step-by-Step Assembly

Detailed guide for assembling the e-Spinner Super Jumbo components.

Controls and Operation

Control Panel Overview

Details the SPIN/PLY, SPEED, and ON/OFF controls on the e-Spinner Super Jumbo.

Foot Switch Usage

Explains the two operating modes for the foot switch: Alternate and Momentary.

Machine Status and Power

Describes the Red LED indicator states and the ON/OFF switch functions.

Important Safety Notes

Warnings regarding cord handling, warranty, and unplugging the power supply.

Spinning Guide

How to Spin Yarn

Instructions on how to spin yarn, including speed and tension adjustments.

Bobbin Change & Orifice Bushes

Procedure for changing bobbins and using orifice reducer bushes for yarn control.

Plying Guide

How to Ply Yarn

Instructions on how to ply yarn using the e-Spinner Super Jumbo.

Lubrication and Safety

Reminders for lubrication and essential safety guidelines for operating the machine.

Ashford e-Spinner Super Jumbo Specifications

General

Type	Electric Spinning Wheel
Speed	0-500 RPM
Power Source	Mains Power
Included Accessories	3 jumbo bobbins, foot switch, padded carry bag
Power Supply	100 - 240V AC to 12V DC adapter
Tensioning System	Adjustable
Dimensions	38cm wide x 30cm deep x 30cm high (15" x 12" x 12")
Motor	12V DC 2.0A 70W