Ashford Jack Loom User Manual

INSTRUCTIONS
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is any
fault in manufacture we will replace the item. To validate our guarantee please
visit our website or write to us.
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton, 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
JL90ES140618V5
Jack Loom
8 Shaft - 97cm (38ins)

Ashford Jack Loom Specifications

General

Brand	Ashford
Model	Jack Loom
Category	Spinning Wheels
Language	English

Summary

Jack Loom Assembly Guide

Base Frame Assembly

Step-by-step instructions for assembling the base structure of the loom.

Castle Sides and Beater Stops

Attaching castle sides, blocks, and securing rails using specified hardware.

Lever Assembly and Ratchet

Installation of steel rods, cloth beam support, and the ratchet mechanism.

Ratchet Dog Installation

Detailed steps for attaching the ratchet dog to the cloth beam support FX.

Treadle and Spacer Setup

Brake System Components

Attaching the brake lever, cable, and turnbuckle for the brake system.

Handle, Crank, and Warp Roller

Heddle Loading and Shaft Prep

Loading Texsolv heddles onto shafts and preparing them for use.

Castle Top Rails and Shelf

Beater and Reed Integration