PAGE 18
MODULE: PATTERN SETTINGS
ADJUSTING THE PATTERN TEMPO
Press the TEMPO button to enter
pattern tempo mode
, the
current pattern tempo value will light on the LED screen.
Use the (+) and (-) buttons to set to desired pattern. You can
set the pattern tempo from 30bpm to 280bpm. To reset the
tempo press the (+) and (-) at the same time.
MODULE: METRONOME
THE METRONOME FUNCTION
Press the CLICK button to turn the metronome on/off, the LED
displays the current time signature and the indicator on the
click button lights. Press the (+) and (-) buttons to change the
time signature (1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8).
Note: When a pattern is playing the click button will flash to the
pattern beat.
ADJUST CLICK SAMPLE/VOLUME
Press and hold the CLICK button, while holding, use the (+) and
(-) buttons to adjust the click sound.
There are 4 click sounds available: metronome, beep, cowbell
and voice. When you turn on the click, the default sound is
‘metronome’.
To adjust the click volume, press the VOLUME button in the
time
signature choice mode
and use the (+) and (-) buttons to adjust.
Press (CLICK) again to exit the
time signature choice mode
.
To Next Page
Loading...
